How can I get my house bolted down? Around Town, posted by homeowner, a resident of the Community Center neighborhood, on Apr 15, 2007 at 11:22 pm
I know, I know. I should have had my old house bolted down (for earthquake protection) years ago! But I didn't. Now I'm looking into getting it done, and I'm not sure what kind of contractor does work like this - especially at a reasonable price. Anyone have any suggestions? How much can I expect to pay for something like this? Thanks for any help!
Posted by Remodler, a resident of Another Palo Alto neighborhood, on Apr 16, 2007 at 8:53 am
Talking about reasonable price, in Palo Alto, with contractors, architects, bids, etc. etc. No way. Sorry to say that I think you will end up paying more than you expect. Nothing is ever as simple as it sounds and there are always "reasons" why you will end up paying out more than even the agreed price. For some reason, an architect will have to change something after the deal is made and the work has started, which means that you have no choice left and then when the city gets involved, they will expect things to be done somewhat differently. Good Luck.
Posted by Walter_E_Wallis, a resident of the Midtown neighborhood, on Apr 16, 2007 at 11:32 am
When you open up a wall you are often surprised. If you want to pay an architect to open up all your walls so she can be sure of conditions, do so, but usually it is cheaper to go with the educated guess, then pay for surprises.
Posted by joyce, a resident of the Crescent Park neighborhood, on Apr 16, 2007 at 1:07 pm
I had this done a few years ago on my old house. It was not a big deal. You also want to look into bracing cripple walls. You certainly don't need an architect, you just need experienced "earthquake retrofit" people to crawl around under the house.
That said, within a day after the work was done, it turned out that one of the workmen had whacked the gas burner of an old floor furnace, probably when moving a cripple wall bracing board around, and I was lucky the house didn't go up in an explosion. When I contacted the earthquake guy later, he denied his people had done this.
Anyone can make a mistake, but the workman covering it up, particularly when it was a dangerous mistake, and the owner then denying it was unforgiveable. (They also whacked the door into the cellar, but I saw that happen, so they fixed it.)
I would tell you the company, but I don't want to get sued. I googed and found this web site that may be helpful. www.abag.ca.gov/bayarea/eqmaps/fixit/fixit.html
Follow links in there and you will get to contractors. The fellow I had the problem with is based in Menlo Park, and since there are several listed in Menlo Park, perhaps I can give you that clue.
Posted by Walter_E_Wallis, a resident of the Midtown neighborhood, on Apr 16, 2007 at 3:17 pm
Would you have an appendectomy without a diagnosis?
Contractors will give you an estimate, but an architect will give you bid documents that, among other things, require the contractor to have a bond and proper insurance. When the contractor "discovers" something that will cost more to fix, the architect can evaluate the contractor's assessment and price. A low bid without professionally prepared specifications is an invitation to trouble. I had a garage replace a $200 component on my car and my trouble was not cured - they then found that a $20 switch was the cause.